Abstract
A new reversed-phase high performance liquid chromatography method was developed and validated for the simultaneous determination of losartan potassium and atenolol in tablets. The separation was achieved on Supelcosil ODS analytical column (25×0.46 cm, i.d., 5 µm) using acetonitrile and 25 mM potassium dihydrogen phosphate (45:55 v/v, pH 3.00±0.05) as mobile phase at a flow rate of 1.2 ml/min. Detection was carried out using a UV detector at 227 nm. The method was validated. The developed and validated method was successfully applied for the quantitative analysis of Losar beta® tablets. The total chromatographic analysis time per sample was about 6 min with atenolol, chlorzoxazone (internal standard) and losartan eluting at retention times of about 2.72, 4.89 and 5.61 min, respectively. The standard curves were linear over the concentration ranges, 1 to 10 µg/ml for losartan potassium and atenolol. The values obtained of LODs were 0.029 and 0.062 µg/ml and LOQs were 0.078 and 0.187 µg/ml for losartan potassium and atenolol, respectively. The proposed method is fast, accurate and precise for the determination of losartan potassium and atenolol for routine quality control of tablets containing these two drugs.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.