Abstract
AbstractAn acousto‐optic laser deflector was used as a shutter for high‐speed imaging of laser interference fringes using an ordinary CCD camera. The exposure duration was set by the pulse width of the high‐frequency signal applied to the acousto‐optic deflector. Changes in laser interference fringes due to an impulse discharge in air were obtained at an exposure duration of 4 µs. By applying a sequence of high‐frequency signals with different frequency, the beam was deflected to four different angles at different times, allowing four interference images to be captured on a single video frame. This was used for time‐resolved imaging of the interference fringe pattern. © 2004 Wiley Periodicals, Inc. Electr Eng Jpn, 148(2): 76–83, 2004; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/eej.20011
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
