Development of a gas chromatography–mass spectrometry method to monitor in a single run, mono- to triterpenoid compounds distribution in resinous plant materials

Abstract

A new procedure based on gas chromatography coupled to mass spectrometry (GC–MS) was developed for the simultaneous determination of mono- to triterpenoid compounds in resinous materials. Given the difference of volatility and polarity of the studied compounds some critical steps in this methodology had to be identified and investigated. The recovery of volatile compounds after sample extraction was studied. A recovery range from 30% to 100% from the more volatile monoterpene to the least one was observed. Then the mandatory derivatization step for the analysis of pentacyclic triterpenes bearing hydroxyl and carboxyl groups was optimized. Results showed that derivatization using N,O-bis(trimethylsilyl)trifluoroacetamide (BSTFA) and trimethylchlorosilane (TMCS) in pyridine (22:13:65 v/v/v) for 2h at 30°C was the most efficient method of derivatizing all the hydroxyl and carboxylic acid groups contained in the triterpene structures. After choosing the best injection parameters for these compounds, the selectivity of the GC column towards the separation of these terpenoids was investigated using statistical tools (principal component analysis and desirability functions). A separation with a good resolution was achieved on an HP-5ms column using a programmed temperature vaporizing injector (PTV). The method was pre-validated in terms of detection limits (LOD from 100μgL−1 to 200μgL−1 depending on the compound), linearity and repeatability using seven compounds representative of mono- and triterpenoid classes. An exhaustive characterization of various types of resins (di-, triterpenic and oleo-gum resins) was achieved.