Development of a four-layer DOI PET detector using long crystals segmented by subsurface laser engraving

Abstract

Since the spatial resolution and sensitivity of positron emission tomography (PET) scanners can be improved by using scintillation detectors with depth-of-interaction (DOI) capability, an original four-layer DOI detector using a pixelated crystal array has been developed in our group. For DOI identification, reflectors have been inserted between the crystals in each layer with a specific arrangement in order to cause light sharing between the layers of the crystal array. However, the precise fabrication of pixelated crystal arrays was challenging and expensive compared to monolithic arrays. In the current study, a four-layer DOI detector composed of long crystals segmented into four segments by applying subsurface laser engraving (SSLE) was proposed. LuYSiO5 (LYSO) crystals of 1 × 1× 20 mm3 were segmented into four segments in the largest dimension using SSLE. A 6 × 6 crystal array using the segmented crystals was prepared and mounted on a 4 × 4 channel multi-pixel photon counter (MPPC, 2 × 2 mm active area). The performance of the proposed detector was investigated and compared with that of original four-layer DOI detector composed of discrete crystals of 1 × 1× 5 mm3 in terms of the crystal identification, layer separation and energy resolution. The 2D position maps of the detectors were obtained by the Anger-logic calculation, and the crystal responses were clearly separated for both detectors. Average energy resolutions of 10.0% ± 1.0%, and 10.5% ± 0.9% at 511 keV were obtained for the proposed detector, and the original detector composed of the discrete crystals, respectively. The layer separation performance was evaluated using separation ratio, which was the ratio of true counts in a specific irradiated crystal in a layer to the total counts in all four crystals stacked on top of each other. The responses of all four layers were clearly separated with a separation ratio of over 0.89 for the proposed and original detectors, respectively. The performance of the proposed detector was well comparable to the original detector composed of the discrete crystals, while the fabrication of the segmented detector was precise and simple.