Development of a filter-based near-surface remote sensing system to retrieve far-red sun-induced chlorophyll fluorescence

Abstract

Observations of sun-induced chlorophyll fluorescence (SIF) by remote sensing have improved our understanding of the structural and physiological dynamics of vegetation. Substantial efforts have been made to measure SIF with ground-based sensing systems, but field observation data for various plant functional types are still sparse. This is partly due to the limited availability of commercial SIF measurement systems, the relatively high cost of hyperspectral spectroradiometers, and the difficulties of sensor calibration and maintenance in the field. We developed a filter-based smart near-surface remote sensing system for SIF (4S-SIF) to overcome the technical challenges of monitoring SIF in the field, which also decreased the sensor cost, thus enabling more comprehensive spatial sampling. To retrieve SIF, we combined ultra-narrow bandpass filters (full width half maximum <1.3 nm) and photodiode detectors to observe electromagnetic radiation at specific wavelengths (757, 761, and 770 nm). We confirmed that the spectral and radiometric performance of the bandpass filters was satisfactory to retrieve SIF by comparing them to a high-spectral-resolution spectroradiometer that served as a reference. In particular, we confirmed that the digital numbers (DNs) from 4S-SIF exhibited linear relationships with the DN from the reference spectroradiometer in each band (R2 > 0.99). In addition, we developed equations to correct for temperature-induced changes in filter transmittance, such that SIF can be reliably extracted in outdoor environments without the need to actively stabilize the temperature. Furthermore, we confirmed that the SIF signal from 4S-SIF had a strong linear relationship with the reference spectroradiometer-based SIF. Importantly, this relationship held even when the physiological mechanisms of the plant were altered by a herbicide treatment that induced substantial changes in the SIF signal (R2 = 0.85, relative RMSE = 0.22), which indicated that 4S-SIF could be used to retrieve SIF. We believe that 4S-SIF will be a useful tool for collecting in-situ SIF data across multiple spatial and temporal scales.