Abstract
A portable and cost-effective technique to measure the dimethyl ether (DME) concentrations has been developed. It is based on an electrochemical principle measuring the oxidation current of DME at an applied potential of +0.2V versus a Ag/AgCl reference electrode. Thick-film printing technique is used for the fabrication of this DME sensor, and platinum nanoparticles in the crystallite size of 5.5 nm are used for the modification of the working electrode surface. This modification enhances the sensor performance significantly leading to a higher sensitivity of the sensor comparing to bare platinum electrode. Evaluation and characterization of this sensor are carried out over the DME concentration range of 0-7% (v/v), and a linear relationship between sensor outputs and the DME concentrations with an average R(2) of 0.996 exists. The reproducibility of the sensor is also very good. This electrochemically based DME sensor fabricated by thick-film screen printing technique and using the platinum nanoparticles to enhance its performance will be valuable and practical for the estimation of the airway mucosal blood flow.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
