Development of a DC Current-Blocking Device for Transformer Neutrals

Abstract

In the early 1990s, Hydro-Que/spl acute/bec undertook a joint project with GE to develop and commission a dc current-blocking series capacitor for the transmission lines forming part of its main power system in the area surrounding the grounding electrode of the Radisson HVdc substation. The aim of this project was to minimize the harmful effects of dc current flowing through the main network during the ground-return operating mode of the Radisson-Sandy Pond multiterminal HVdc link. With a view to having available technology applicable anywhere in the network, TransE/spl acute/nergie and IREQ, two divisions of Hydro-Que/spl acute/bec, later took part in the development of a dc current-blocking device that could be installed in transformer neutrals. This work was undertaken not only with immediate needs in mind but also to solve specific problems that could appear sporadically at different network locations. Tests on a prototype of the new blocking device were performed in the High Power Laboratory at IREQ, followed by tests on the preproduction unit, in accordance with the specified requirements. The neutral dc current-blocking device (NCBD) was then installed at a regional substation for a one-year operating period to verify its immunity under normal network events and switching conditions. During this period, no disruption to the smooth operation of the substation or protection of the ac system occurred. The NCBD operated correctly and suffered no fault or unsolicited operation.