Abstract

This article describes the theoretical considerations, design criteria, and experimental performance of a cyclone-based, liquid-film, bioaerosol sampler. Different from conventional cyclones, this novel sampler draws air tangentially into the bottom of a swirling cyclone, creating a negative pressure differential which causes continuous suction of sorption liquid from its reservoir into the cyclone. The liquid swirls with the air vortex and rises spirally along the sampler wall in the form of a thin film. In the presence of an excess pressure differential, the liquid goes over the upper edge of the cyclone (overflow mode) and flows back to the bottom of the sampler. As a result, there is a continuous circulation of the sorption liquid in the sampler, which enhances the efficacy of capturing viable aerosol particles from incoming air. In this study, mathematical models using simplified Navier-Stokes equations are developed to describe the behavior of the airflow, the formation of the liquid film, and the p...

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.