Abstract
Introduction. The article presents results of developing a certified reference material for the physical properties of the soil clay (loam). The certified characteristics of the reference material are as follows: moisture content at the liquid limit via fall-cone test, moisture content at the plastic limit, soil particle density via pycnometer method.Materials and methods. The certified values of the physical properties of the soil clay (loam) were determined using the method of interlaboratory metrological experiment.Results. The bounds of absolute error of the certified values are as follows: 1.9 % for moisture content at the liquid limit via the fall-cone test, 1.5 % for moisture content at the plastic limit, 0.03 g/cm3 for soil particle density. The validity period of the certified reference material is 5 years.Discussion and conclusion. The developed reference material was registered in the State Register of type-approved reference materials as GSO 11038–2018. The reference material is aimed at: controlling the accuracy of the measurement results of certified characteristics; conducting interlaboratory comparisons; testing laboratories proficiency.
Highlights
The article presents results of developing a certified reference material for the physical properties of the soil clay
Received – 20 February 2018; Revised – 15 March 2018 Accepted for publication – 10 April 2018
The developed reference material was registered in the State Register of type-approved reference materials as GSO 11038–2018
Summary
Поступила в редакцию 20 февраля 2018 г., после доработки – 15 марта 2018 г. Представлена информация о разработке стандартного образца физических свойств грунта. Аттестуемыми характеристиками стандартного образца являются влажность на границе текучести методом балансирного конуса, влажность на границе раскатывания, плотность частиц грунта пикнометрическим методом. Установление аттестованных значений физических свойств грунта глинистого (суглинка) выполнено способом межлабораторной метрологической аттестации. Границы абсолютной погрешности аттестованных значений влажности на границе текучести методом балансирного конуса составляет 1,9 %, влажности на границе раскатывания – 1,5 %, плотности частиц грунта – 0,03 г/см. Срок годности стандартного образца – 5 лет. Разработанный стандартный образец зарегистрирован в Государственном реестре утвержденных типов стандартных образцов под номером ГСО 11038–2018. Стандартный образец предназначен для контроля точности результатов измерений аттестованных характеристик; проведения межлабораторных сличительных испытаний, проверки компетентности лабораторий. Ключевые слова: грунт глинистый (суглинок), физические свойства грунта, влажность на границе текучести, влажность на границе раскатывания, плотность частиц, стандартный образец. Received – 20 February 2018; Revised – 15 March 2018 Accepted for publication – 10 April 2018
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.