Development of a certified reference material for accurate determination of the leaching of Pb and Zn in solid waste.

Abstract

Certified reference materials (CRMs) with high accuracy and traceability play a significant role in the calibration of equipment and validation of analytical methods. However, there is still a lack of suitable solid waste CRMs for quality assurance and quality control. Thus, a CRM (GBW(E)085538) was developed for accurate determination and reliable measurement of the leaching of Pb and Zn in solid waste according to the requirements of ISO 17034 and the recommendations of ISO Guide 35. This study describes the steps performed for the development of the CRM. These steps include material preparation, homogeneity, and stability during transport and storage, assignment of certified values, and their uncertainties. The material was dried, ground, sieved and well-mixed, and the final bulk material was bottled in 1kg portions. Analytical techniques like inductively coupled plasma-mass spectrometry (ICP-MS), inductively coupled plasma-optical emission spectrometry (ICP-OES), and flame atomic absorption spectrometry (AAS) have been used for the characterization of property values. Concurrently, an inter-laboratory comparison study involving 9 qualified laboratories was implemented to support the certification study. The certified values of Pb and Zn were (4.66 ± 0.21) mg/L and (2.95 ± 0.14) mg/L with 7-month stability.