Abstract

BackgroundMulti-tracer positron emission tomography (PET) imaging can be accomplished by applying multi-tracer compartment modeling. Recently, a method has been proposed in which the arterial input functions (AIFs) of the multi-tracer PET scan are explicitly derived. For that purpose, a gamma spectroscopic analysis is performed on blood samples manually withdrawn from the patient when at least one of the co-injected tracers is based on a non-pure positron emitter. Alternatively, these blood samples required for the spectroscopic analysis may be obtained and analyzed on site by an automated detection device, thus minimizing analysis time and radiation exposure of the operating personnel. In this work, a new automated blood sample detector based on silicon photomultipliers (SiPMs) for single- and multi-tracer PET imaging is presented, characterized, and tested in vitro and in vivo.ResultsThe detector presented in this work stores and analyzes on-the-fly single and coincidence detected events. A sensitivity of 22.6 cps/(kBq/mL) and 1.7 cps/(kBq/mL) was obtained for single and coincidence events respectively. An energy resolution of 35% full-width-half-maximum (FWHM) at 511 keV and a minimum detectable activity of 0.30 ± 0.08 kBq/mL in single mode were obtained. The in vivo AIFs obtained with the detector show an excellent Pearson’s correlation (r = 0.996, p < 0.0001) with the ones obtained from well counter analysis of discrete blood samples. Moreover, in vitro experiments demonstrate the capability of the detector to apply the gamma spectroscopic analysis on a mixture of 68Ga and 18F and separate the individual signal emitted from each one.ConclusionsCharacterization and in vivo evaluation under realistic experimental conditions showed that the detector proposed in this work offers excellent sensibility and stability. The device also showed to successfully separate individual signals emitted from a mixture of radioisotopes. Therefore, the blood sample detector presented in this study allows fully automatic AIFs measurements during single- and multi-tracer PET studies.

Highlights

  • Multi-tracer positron emission tomography (PET) imaging can be accomplished by applying multi-tracer compartment modeling

  • Positron emission tomography (PET) is a diagnostic molecular imaging technique that allows in vivo visualization of metabolic processes within the body based on the biodistribution of a radiotracer that is administered to the patient

  • The aim of this study was to develop a novel detector based on silicon photomultipliers (SiPMs) for arterial input function (AIF) measurements on single- and multi-tracer PET imaging

Read more

Summary

Introduction

Multi-tracer positron emission tomography (PET) imaging can be accomplished by applying multi-tracer compartment modeling. Positron emission tomography (PET) is a diagnostic molecular imaging technique that allows in vivo visualization of metabolic processes within the body based on the biodistribution of a radiotracer that is administered to the patient. Many applications of this technique are based on dynamic PET scans that provide access to the tracer kinetics in vivo. In coronary artery disease (CAD) assessment, evaluation of both myocardial blood flow (MBF) and viability is usually required to provide an accurate diagnosis of the disease [1] In these cases, it would be technically and economically advantageous to reduce the number of scans to the minimum. Several strategies have been proposed so far in order to enable the possibility of performing PET scans with multiple tracers simultaneously [2,3,4,5,6]

Objectives
Methods
Results
Discussion
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call