Abstract
A high power solid-state RF power amplifier of 3kW at 325MHz has been developed using only four RF power amplifier modules of 850W power output each. The design and characterization of RF power modules have been presented. A four way Wilkinson power combiner adds the output of four power amplifier modules with a total transmission loss of less than 6%. The combined power amplifier has a power gain of 20.2dB at 1-dB compression point, and the corresponding output power is 2.8kW at 325MHz. The drain efficiency of the power amplifier is 65.3% at 3kW. All the harmonics of this amplifier are below −40dBc. The amplifier has better characteristics like fewer numbers of active devices per kilo watt, high efficiency, high gain, and ruggedness etc for RF accelerator applications.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.