Abstract
The new FF-LYNX communication protocol, aiming at the fulfillment of non-homogeneous latency and bandwidth requirements of future High Energy Physics experiments, as well as its implementation into IP Cores available for ASICs development, are described in this paper. The first test-chip implementing FF-LYNX IP-Cores has been designed in the IBM 130 nm CMOS technology, adopting radiation hardening techniques. Transmitter and Receiver interfaces, designed in three different speed options, 4 × F, 8 × F and 16 × F (F=reference clock frequency), as well as different rad-hard FIFOs, constitute the overall architecture of the testchip. A detailed analysis of the area, power consumption and speed has been performed besides the functional characterization, by means of a configurable test-bed. X-ray irradiation tests have been carried out at CERN facilities to verify the Total Ionization Dose hardness of the interfaces, with their full functionality up to 40 Mrad(SiO2).
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
