Abstract
Methods and algorithms for calculating the frequency of self-oscillations in swirling coolant flows of nuclear power plants with VVER reactors have been developed. The frequency of self-oscillations occurring in the acoustic sections of the primary circuit and their connections in the starting modes of the power unit and when operating at the rated power level is predicted. It is established that the self-oscillation frequencies can fall into the frequency bandwidth of mechanical vibrations and vibrations of the reactor plant’s internal devices. It is shown that in order to prevent the resonance of self-oscillations of the coolant with the vibration frequencies of internal devices, it is necessary and sufficient to take the frequency of self-oscillations outside the bandwidth of the vibration frequency of structures. The results of verification of the results of forecasting the frequency of self-oscillations in swirling coolant flows at a nuclear power plant unit with VVER are presented. The application of the developed technique shows that the pendulum oscillations of the VVER - 1200 body are caused by an increase in the parameters of the coolant and the geometric dimensions of the VVER - 1200 reactor compared to VVER-1000.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have