Abstract
Depletion calculation is important for studying the transmutation efficiency of minor actinides and long-life fission products in accelerator-driven subcritical reactor system (ADS). Herein the Python language is used to develop a burnup code system called IMPC-Burnup by coupling FLUKA, OpenMC, and ORIGEN2. The program is preliminarily verified by OECD-NEA pin cell and IAEA-ADS benchmarking by comparison with experimental values and calculated results from other studies. Moreover, the physics design scheme of the CIADS subcritical core is utilized to test the feasibility of IMPC-Burnup program in the burnup calculation of ADS system. Reference results are given by the COUPLE3.0 program. The results of IMPC-Burnup show good agreement with those of COUPLE3.0. In addition, since the upper limit of the neutron transport energy for OpenMC is 20 MeV, neutrons with energies greater than 20 MeV in the CIADS subcritical core cannot be transported; thus, an equivalent flux method has been proposed to consider neutrons above 20 MeV in the OpenMC transport calculation. The results are compared to those that do not include neutrons greater than 20 MeV. The conclusion is that the accuracy of the actinide nuclide mass in the burnup calculation is improved when the equivalent flux method is used. Therefore, the IMPC-Burnup code is suitable for burnup analysis of the ADS system.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
