Abstract
A simple, rapid, and accurate, routine-HPLC method is described for quantitation of Cefdinir in bulk powder and dosage form. The chromatographic separation was carried out on Chromolith Performance RP-18e column, a relatively new packing material consisting of monolithic rods of highly porous silica, using isocratic binary mobile phase of MeOH and 25 mM KH2PO4 pH 3.0 in the ratio of 10:90 at flow rate of 5 mL/min and 40°C. A diode array detector was used at 214 nm for detection. The elution time of Cefdinir was found to be 2.183 ± 0.003 minutes. The method was validated for system suitability, linearity, precision, limits of detection and quantitation, specificity, stability, and robustness. The robustness study was done for small changes in KH2PO4 concentration and pH, temperature, flow rate, wavelength of detection, % of MeOH in mobile phase, and injection volume. Stability tests were done through exposure of the analyte solution for four different stress conditions: Reflux with 1 N HCl, reflux with 1 N NaOH, reflux with 30% H2O2 and exposure to UV radiation. The limits of detection and quantification were 0.313 and 0.625 µgmL−1, respectively. The recovery value of this method was 98.00% and the reproducibility was within 2.98.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have