Development and validation of a rapid high‐performance liquid chromatography method for the quantification of exenatide

Abstract

The objective was to develop a simple HPLC method to quantify exenatide--a 39 amino acid residue incretin mimetic used in diabetes therapy. To date, only non-validated, sometimes incomplete, gradient methods have been reported in the literature. Isocratic separation was achieved using a C₄ column and a mixed solvent system, A-B-C (48:45:7, v/v/v; pH* 5.2), where A represents KH₂PO₄ (pH 4.5; 0.1 M) and MeCN (60:40, v/v), B corresponds to NaClO₄ ·H₂O (pH 6.0; 0.2 M) and MeCN (60:40, v/v), and C is water. Exenatide eluted at 3.64 min and the total run time was 6 min. The method was specific and the response was accurate, precise and linear from 0.75 to 25 µg/mL. It was used to quantify exenatide transport across intact and laser-porated porcine skin in vitro as a function of laser fluence [0 (i.e. intact skin), 9 and 15 J/cm², respectively]. Although no permeation was observed using intact skin, cumulative exenatide permeation after 8 h through laser porated skin was 9.6 ± 6.5 and 12.4 ± 6.4 µg/cm² at fluences of 9 and 15 J/cm², respectively. This is the first validated isocratic method for exenatide quantification and it may be of use in quality control analysis and with other biological matrices.