Development and Testing of a FuelFlex Dry-Low-NOx Micromix Combustor for Industrial Gas Turbine Applications With Variable Hydrogen Methane Mixtures

Abstract

Abstract The negative effects on the earth’s climate make the reduction of the potent greenhouse gases carbon-dioxide (CO2) and nitrogen oxides (NOx) an imperative of the combustion research. Hydrogen based gas turbine systems are in the focus of the energy producing industry, due to their potential to eliminate CO2 emissions completely as combustion product, if the fuel is produced from renewable and sustainable energy sources. Due to the difference in the physical properties of hydrogen-rich fuel mixtures compared to common gas turbine fuels, well established combustion systems cannot be directly applied for Dry Low NOx (DLN) hydrogen combustion. The paper presents initial test data of a recently designed low emission Micromix combustor adapted to flexible fuel operation with variable fuel mixtures of hydrogen and methane. Based on previous studies, targeting low emission combustion of pure hydrogen and dual fuel operation with hydrogen and syngas (H2/CO 90/10 vol.%), a FuelFlex Micromix combustor for variable hydrogen methane mixtures has been developed. For facilitating the experimental low pressure testing the combustion chamber test rig is adapted for flexible fuel operation. A computer-controlled gas mixing facility is designed and installed to continuously provide accurate and homogeneous hydrogen methane fuel mixtures to the combustor. An evaluation of all major error sources has been conducted. In the presented experimental studies, the integration-optimized FuelFlex Micromix combustor geometry is tested at atmospheric pressure with hydrogen methane fuel mixtures ranging from 57 vol.% to 100 vol.% hydrogen in the fuel. For evaluating the combustion characteristics, the results of experimental exhaust gas analyses are applied. Despite the design compromise, that takes into account the significantly different fuel and combustion properties of the applied fuels, the initial results confirm promising operating behaviour, combustion efficiency and pollutant emission levels for flexible fuel operation. The investigated combustor module exceeds 99.4% combustion efficiency for hydrogen contents of 80–100% in the fuel mixture and shows NOx emissions less than 4 ppm corrected to 15 vol.% O2 at the design point.