Abstract
As the number of disabled people grows, independence and mobility become a priority for those individuals. To achieve this goal, a ‘Turny-type power seat’ was developed in this study to assist a disabled person rise from a vehicle without trouble. The design and modeling of the power seat were performed using AutoCAD and CATIA software. The major motions of the power seat system are swiveling, sliding, and extending, which are accomplished primarily by DC motors, chains, and gears. Most of the power seat parts were made from mild steel. Welding technology was used throughout the frame fabrication. To ensure the safety and stability of the power seat, various tests were performed, and the results analyzed. The static analysis of the power seat was carried out by ANSYS 11.0. The results showed that the power seat conformed to the Americans with Disabilities Act (ADA) standards. The durability test was performed by repeatedly rotating and sliding the power seat under loading conditions. Dynamic crash simulation was carried out using the LS-DYNA software. The durability test ensured a longer life of the power seat, while the crash analysis showed a small rotational distortion that was not harmful to passengers. However, the front seat had a slightly larger forward displacement, which was not comfortable for passengers. Therefore, further modifications of the power seat should be done to improve the performance, with attention given to the reduction of the forward displacement in the event of a crash.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.