Development and Parametric Optimisation of Pure Magnesium Matrix Surface Composite by Friction Stir Processing

Abstract

Friction stir processing (FSP) is an emerging method for improving surface properties of materials by composite fabrication. This study aims at optimizing the major FSP parameters and analysis of their real-time influence on the mechanical performance of a surface composite fabricated with Magnesium (Mg) matrix and Titanium Carbide (TiC) as reinforcement. Effects of different process parameters, tool rotational speed, plunge depth, the linear speed of the tool, cooling condition, and number of FSP passes have been examined. Using L27 array, a total of 27 combinations of these process parameters were analyzed by taking microhardness as an output response to find influential parameters by Taguchi's technique. Maximum micro-hardness was achieved when tool rpm of 600, cooling temperature of -10o C, tool feed of 15 mm/min, plunge depth of 0.35 mm, and 3 passes of FSP tool were chosen with the help of Taguchi's method. Analysis of variance indicated that cooling temperature, the tool feed, and the number of passes of the FSP tool were the most significant parameters.