Abstract

Aceclofenac (AC) is a nonsteroidal anti-inflammatory drug used in the treatment of chronic pain in conditions such as rheumatoid arthritis, with frequent administration during the day. The formulation of sustained release matrix pellets can provide a promising alternative dosage form that controls the release of the drug, with less blood fluctuation and side effects—especially those related to the gastric system. The extrusion/spheronization technique was used to formulate AC matrix pellets. The response surface methodology (version 17.2.02.; Statgraphics Centurion) was used to study the impacts of Eudragit RL 100 and PVP K90 binder solution concentrations on the pellets’ wet mass peak torque, pellet size, and the release of the drug. Statistically, a significant synergistic effect of PVP K90 concentration on the peak torque and pellet size was observed (p = 0.0156 and 0.031, respectively), while Eudragit RL 100 showed significant antagonistic effects (p = 0.042 and 0.013, respectively). The peak torque decreased from 0.513 ± 0.022 to 0.41 ± 0.021 when increasing the Eudragit RL 100 from 0 to 20%, and the pellet size decreased from 0.914 ± 0.047 to 0.789 ± 0.074 nm. The tested independent factors did not significantly affect the drug release in the acidic medium within 2 h, but these pellet formulae maintained the drug release at less than 10% in the acidic medium (pH 1.2), which may decrease gastric irritation side effects. In contrast, a highly significant synergistic effect of Eudragit and highly antagonistic effect of the PVP solution on drug release in the alkaline-pH medium were observed (p = 0.002 and 0.007, respectively). The optimized pellet formula derived from the statistical program, composed of 3.21% Eudragit and 5% PVP solution, showed peak torque of 0.861 ± 0.056 Nm and pellet size of 1090 ± 85 µm, and resulted in a significant retardation effect on the release after 8 h compared to the untreated drug.

Highlights

  • Aceclofenac (AC) is a non-steroidal anti-inflammatory drug (NSAID), and it is prescribed and recommended in the treatment of osteoarthritis and rheumatoid arthritis to relieve pain

  • Eudragit RL 100 was used as a polymer and PVP K90 as a mass-forming agent to sustain the release of AC

  • A 32 full factorial design was used to determine the effects of different concentrations of Eudragit RL100 (X1) and PVP K90 (X2) on different response parameters, including mean line torque (Y1), pellet size (Y2), % drug released after 2 h (Y3), and % drug released after 8 h (Y4)

Read more

Summary

Introduction

Aceclofenac (AC) is a non-steroidal anti-inflammatory drug (NSAID), and it is prescribed and recommended in the treatment of osteoarthritis and rheumatoid arthritis to relieve pain. Polymers 2021, 13, 4034 matrix may might provide several advantages over the use of coating procedures for SR purposes, as mentioned previously, in addition to controlling the drug release from the formulated pellets by controlling pellet wet mass properties. Formulations of AC as SR matrix pellets are expected to be able to provide and maintain therapeutically effective plasma concentrations for a period longer than the untreated drug after oral administration. In this current study, Eudragit RL 100 was used as a polymer and PVP K90 as a mass-forming agent to sustain the release of AC. A 32 full factorial design was used to determine the effects of different concentrations of Eudragit RL100 (X1) and PVP K90 (X2) on different response parameters, including mean line torque (Y1), pellet size (Y2), % drug released after 2 h (Y3), and % drug released after 8 h (Y4)

Materials and Methods
Experimental Design
Drug Content
Particle Size
In Vitro Release
Effect of Independent Factors on Wet Mass
Effect on Pellet Size
Effect on In Vitro Release
Optimization of AC Sustained-Release Matrix Pellet Formulation
Conclusions
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call