Development and characterization of an active starch-based film as a chlorogenic acid delivery system

Abstract

Given its health benefits for the human body, chlorogenic acid (CA) offers promising applications in the food industry. However, the instability and low bioavailability of CA remain to be solved. In this paper, a starch-based film prepared by the homogenization and solution-casting method was used as an effective carrier to alleviate these problems. Homogenization (10–50 MPa) reduced the starch paste viscosity and its particle sizes from 21.64 to 7.68 μm, which promoted the starch recrystallization and induced chemical cross-links between starch-CA, as confirmed by the FTIR result with an appearance of a new CO peak at about 1716 cm−1. Accordingly, the rapidly digestible starch content of the film was reduced to 27.83 % and the CA encapsulation efficiency was increased to 99.08 % (from 65.88 %). As a result, the film system extended CA's release time beyond 4 h and significantly increased the heat-treated CA's antioxidant activity. Besides, the tensile strength and elastic modulus of the film were also improved to 6.29 MPa (from 1.63 MPa) and 160.98 MPa (from 12.02 MPa), respectively, by homogenization. In conclusion, the developed active starch-based film could be used as an edible film for the production of functional food or active food packaging.