Abstract
Polyethersulphone (PES) polymer blended with Graphene Oxide (GO) and magnetite ( nano-composite was synthesized using an immersion precipitation process for the filtration of chromium hexavalent ions from leather processing waste water. PES is a synthetic polymer with good chemical resistance, wide pH range (2-13) as well as good mechanical and thermal properties. However, it is hydrophobic and prone to fouling hence its limitations in aqueous separation processes. In order to improve hydrophilicity, porosity, permeability and strength properties of the polymeric membrane, GO was synthesized from coal via a modified Hummers Method and then blended with anhydrous ferrous chloride to form Graphene oxide/ magnetite () hybrid nano-particles. To assess the performance of the membrane pure water flux, Equilibrium Water Content (EWC) and tensile strength test was measured. Structural analysis involved porosity measurement. The filtration efficiency of the membranes was found by testing the waste water for chromium ion concentration before and after filtration. It was established that both the physical properties and chromium ion rejection improved with increase in polymer concentration and addition of hybrid nano-particles.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Zenodo (CERN European Organization for Nuclear Research)
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
