Abstract
The grouting technique is an efficient method for enhancing the stability of cracked slopes through the use of grouting materials. Conventional cement-based grouting materials are costly, energy-intensive, and environmentally damaging. Additionally, cement-hardening slurry is prone to cracks between the slurry and the rock. To address these issues, this study proposed an environmentally friendly grouting material composed of flue gas desulfurization gypsum (FGDG) and blast furnace slag (BFS) with sodium gluconate (SG) as the additive, especially designed for cracked silty mudstone slopes. The effects of different FGDG-to-BFS ratios and SG dosages on the setting time, fluidity, shrinkage, unconfined compressive strength (UCS), tensile strength, and shear strength parameters of hardened grouting slurries, as well as the interfacial bonding strength between silty mudstone and the hardened slurries, were investigated through laboratory tests. Subsequently, the improvement effects of cement-based material and the FGDG-BFS material on cracked silty mudstone were compared by mechanical tests. Finally, the performance of both types of grouting material on cracked silty mudstone slopes was analyzed by numerical simulations based on GDEM. The results demonstrated that the optimal FGDG-to-BFS ratio was 0.8:1, under which, the mechanical properties of the hardened FGDG-BFS slurries cured for 14 days exceeded those of the silty mudstone. The optimal dosage of SG was 0.4%, effectively prolonging the setting time of the slurry and improving the water resistance of the hardened slurries. The FGDG-BFS material exhibited a superior performance in repairing rock cracks compared to cement-based materials, with the damage patterns of the grouted specimens aligning with those of the intact specimens. This new grouting material effectively repaired existing cracks and prevented re-cracking at the interface between the grouting material and silty mudstone, thereby maintaining slope stability over a long period.
Published Version (Free)
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.