Developing strength and toughness in bio-inspired silicon carbide hybrid materials containing a compliant phase

Abstract

Freeze casting has proven to be a versatile processing route to fabricate bio-inspired (“nacre-like”) hybrid composites that exhibit unique combinations of strength and toughness (damage-tolerance). To date, however, the effects of small changes in the architecture of such composites on their mechanical properties have been poorly investigated. Here we examine the influence of microstructural features such as ceramic/polymer ratio, layer thickness, and presence of bridges between ceramic lamellae, on the mechanical performance of the resulting composites. To this end, we compare the flexural strength and resistance to failure of a suite of silicon carbide/polymethyl methacrylate (SiC/PMMA) layered composites made by polymer infiltration of freeze-cast SiC scaffolds with various architectures. Our composite structures all show an increasing fracture resistance with crack extension (rising R-curve behavior) due to extrinsic toughening mechanisms such as uncracked-ligament bridging, inelastic deformation of ductile layers, lamellae pull out and ceramic bridge fracture. We show that a fine tuning of the composite architecture can lead to SiC/PMMA samples with a dendritic morphology, which exhibit the best strength and toughness. Specifically, the presence of ceramic bridges connecting the lamellae is seen to provide a strengthening effect similar to the mineral bridges between aragonite platelets in nacre, where they prevent debonding and limit platelet sliding; additionally, the fracture of these bridges between lamellae during crack extension is a potent toughening mechanism, thereby conferring optimal damage tolerance to the material.