Abstract
A water-circulating column photobioreactor (WCC–PBR) was developed to decrease bubble generation time and mixing time for growing microalgal biomass at low energy consumption. Bubble generation time was decreased by 60.4% and mixing time was decreased by 41.5% owing to an enhanced solution velocity with a water pump. Bubble residence time was decreased by 31.1% and mass transfer coefficient was decreased by 0.4% owing to a reduced distance between air aerator and solution surface. Microalgal growth rate was decreased by 12.7% from 128.9mg/Lday in an air-lifting column photobioreactor (ALC-PBR) to 112.6mg/Lday in a WCC–PBR because of the decrease in residence time of bubbles and an additional shear of cells in a water pump. However, total energy consumption of a WCC–PBR with an air compressor and a water pump was lower by 21.1% than that of an ALC–PBR with only an air compressor.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
