Abstract
In this study, a finite element analysis was used to design composite drive shafts incorporating carbon and glass fibers within an epoxy matrix. A configuration of one layer of carbon–epoxy and three layers of glass–epoxy with 0°, 45° and 90° was used. The developed layers of structure consists of four layers stacked as [ + 45 glass ° / - 45 glass ° / 0 carbon ° / 90 glass ° ] . The results show that, in changing carbon fibers winding angle from 0° to 90°, the loss in the natural frequency of the shaft is 44.5%, while, shifting from the best to the worst stacking sequence, the drive shaft causes a loss of 46.07% in its buckling strength, which represents the major concern over shear strength in drive shaft design.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have