Developing α/β Laminar Composite Structure in CuZn Alloy by Heat Treatment and Submerged Friction Stir Processing

Abstract

A laminar composite structure was developed in a CuZn alloy plate by non-equilibrium heat treatment and subsequent submerged friction stir processing. For this aim, Cu-37 wt.% Zn alloy was initially heat treated to produce a double phase structure. Then, the double phase plate was friction stir processed in underwater media at room temperature. The microstructure and mechanical properties of the samples were analyzed using optical microscopy and tensile test. During heat treatment, the large α grains containing annealing twins converted to a double phase structure with β grains on the α grain boundaries. Heat treatment caused an increase in ultimate tensile strength from 240 MPa to 275 MPa, and a reduction in elongation from 67 to 49%. After friction stir processing, the ultimate tensile strength and elongation were obtained as 380 MPa and 48%, respectively. This desirable mechanical property was achieved due to the formation of a novel composite structure containing parallel ultra-fine grained β layers between dynamically recrystallized α layers.