Develop a sustainable welding procedure for chromium manganese austenitic stainless steel using the ATIG process

Abstract

Chromium manganese austenitic stainless steel is exhibiting an admirable amalgamation of higher strength and stress corrosion resistance. This economical steel is developed to fulfill the requirement of a variety of consumers for high temperature and structural applications. Hitherto, the limitation associate with the TIG welding process is a low depth of penetration which reduces productivity. Activated tungsten inert gas welding (ATIG) is the best suitable option to overcome this problem and satisfy the sustainable welding requirement. Welding procedure has been developed for chromium manganese austenitic stainless steel during ATIG welding using a box behken design (BBD) to improve penetration depth and productivity. The activated flux using SiO2 and TiO2 flux indicates improvement in penetration 5.3 mm and 5.1 mm as compared to TIG welding. The ATIG welded test coupon has strength and hardness of 495 MPa and 195 HV when using SiO2 flux, and 487 MPa and 190 HV when using TiO2 flux, compared to 435 MPa and 165 HV for the TIG welded test coupon. ATIG welds have higher strength and hardness because of their finer grain size when compared to TIG welded test coupons.