Abstract

Reliable gaseous Hg(II) measurement is crucial to mercury emissions control from coal-fired flue gas, but Hg(II) sampling under SO2 condition could probably increase the uncertainty of sorbent traps. CaO-AcS synthesized from calcium acetate and porous support were previously demonstrated to be effective for Hg(II) trapping under SO2-free condition. This work further evaluated SO2 influence on its Hg(II) retention ability via integrating experimental and DFT computational studies. Increased breakthrough rate of HgCl2 was found in a two-section CaO-AcS trap under SO2 conditions. Significant basicity and porosity loss of CaO-AcS were attributed to the formation of agglomerate CaSO3. Hg0 release from CaO-AcS samples suggested potential reactions between Hg(II) and SO2. The detected HgO and Hg2SO4 species by Hg-TPD in CaO-AcS further confirmed this speculation. Moreover, both competition and reduction effects of SO2 on surface-bound Hg(II) species were substantiated by DFT calculations. SO2 showed a stronger interaction with CaO than HgCl2 because SO2 has a lower LUMO level and can accept electrons easier. Reaction pathways indicated Hg(II) was partially reduced to Hg2SO4 under SO2-deficient condition, or directly reduced to Hg0 under SO2-rich condition. This work fully proposed the SO2 influence mechanisms and improvement countermeasures for practical gaseous Hg(II) sampling.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.