Abstract
Hazardous electric arc furnace dust containing dioxins/furans and heavy metals is blended with harbor sediment, fired at 950–1100°C to prepare lightweight aggregates. Dust addition can lower the sintering temperature by about 100°C, as compared to a typical industrial process. After firing at 950°C and 1050°C, more than 99.85% of dioxins/furans originally present in the dust have been removed and/or destructed in the mix containing a dust/sediment ratio of 50:100. The heavy metals leached from all fired mixes are far below Taiwan EPA legal limits. The particle density of the lightweight aggregates always decreases with increasing firing temperature. Greater addition of the dust results in a considerably lower particle density (mostly <2.0gcm−3) fired at 1050°C and 1100°C. However, firing at temperatures lower than 1050°C produces no successful bloating, leading to a denser particle density (>2.0gcm−3) that is typical of bricks.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
