Abstract
The goal of this work was to study the phase and microstructure changes involved in the process of coating formation by detonation spraying of Ti3Al, TiAl, and TiAl3 intermetallics. The O2/C2H2 ratio was varied between 1.1 and 2.0, and the explosive charge was 30–40% of the barrel volume. In most experiments air was used as a carrier gas; selected experiments were performed with argon. We found that depending on the spraying parameters, TiAl3 essentially retains in the coatings or partially decomposes forming TiAl and Ti3Al as minor phases. Detonation sprayed Ti3Al reacts with nitrogen and oxygen partially transforming into titanium nitrides TiN/Ti2N and titanium oxynitrides TiNxOy. TiAl partially decomposes forming Ti3Al, which further reacts with oxygen and nitrogen as the particle temperature and the content of oxygen in the explosive mixture increase. The in situ formed titanium nitrides and oxynitrides show a reinforcing effect increasing the hardness of the coatings.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
