Abstract

Wired and wireless communication data is getting bigger and bigger at such a high pace. Accordingly, the big data (BD) communication networks should be developed as quickly as the quick increase in the exchanging data size is. Based on this regard, this paper proposes a wired and wireless protocol that applies cooperation Network coding (CoNC) in a wired ring topology (WRT) to improve exchanging the BD significantly in wireless mesh network (WMN). The paper presents a solution for distributed nodes to deal with big data over 5G by proposing Hybrid Ring-Mesh Protocols (HRMP) that exploit the CoNC technique at distributed nodes. The proposed protocol (X-ORING) deterministically combines the data that is received at a base station (BS), where the BS wirelessly retransmits the combined data to the WMN members, instead of just forwarding them to the WMN members. Moreover, all members of the WMN are connected by wired optical fibre channels in a WRT and directly to the BS. The results show that applying CoNC in the proposed protocols exploits the advantages of the WRP between the WMN members, and consequently, the WMN packet error rate is significantly improved. Moreover, using optical fibre wires between the mesh network members and the BS increases the WMN coverage region considerably, and allows the BS to receive all members' packets correctly. Finally, the results show that applying CoNC on the WRT improves the entire network maintenance and reliability greatly, simply because the proposed HRMP can continue broadcasting even if one of the direct optical fibre goes out of serves, i.e. the fibre link between one of the N member and the BS lost the connectivity.

Highlights

  • Big data (BD) communication networks are needed for almost all modern applications, starting from simple local networks that may consist of several members to complicated satellite and mobile networks that may connect a large number of users

  • Unlike [1,2,3,4,5,6], this paper proposes implementing cooperating network coding (CoNC) as a useful technique to help in solving the big data (BD) challenges for mesh network (MN)

  • 2.3 Cooperation networking coding over ring topology and reliability improvement When a wire that connects a member with the base station (BS) got disconnected as a result of maintenance operations, or any an unexpected fault as shown in Fig. 3a, or two wires got disconnected as shown in Fig. 3b, the disconnected member is named in this paper as a “dead member”; cooperation Network coding (CoNC) can solve this problem once applied over the RT in the following algorithm: The data packet of the dead member already sent to the two neighbours; each dead member’s neighbour combines (X-ORING) the dead packet’s data to its data packet and sends the combined packet to the BS through its wires

Read more

Summary

Introduction

Big data (BD) communication networks are needed for almost all modern applications, starting from simple local networks that may consist of several members to complicated satellite and mobile networks that may connect a large number of users.

Results
Conclusion
Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call