Abstract
Determining the torque loading of the cycloid gear
Highlights
The test object and test stand are described in [6]
The test stand has been equipped with a laser sensor for measuring the horizontal displacement of the cycloidal gear housing
The purpose of the analysis is to check the possibility of determining the property and size of the load torque by means of the laser sensor signal
Summary
The test object and test stand are described in [6]. The test stand has been equipped with a laser sensor for measuring the horizontal displacement of the cycloidal gear housing (see Figure 1). Characteristic features of the laser sensor are as follows: a. The purpose of the analysis is to check the possibility of determining the property and size of the load torque by means of the laser sensor signal. The test conditions are given below: Tested object: Three-disc Cyclo gearbox (prototype) Work mode: Reducer Input speed (mean): 1,600 rpm Output torque (mean): 495 Nm Type of oil: ATF M3 Plus Temperature of oil: 37.4°C
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Similar Papers
More From: Scientific Journal of Silesian University of Technology. Series Transport
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.