DETERMINING THE PATTERNS OF STABILITY OF MINE WORKINGS FOR CALCULATION ROOF BOLTING PARAMETERS

Abstract

Purpose. The published studies are aimed at determining the mechanism of deformation of the rocks of the contour around the workings in terms of the parameters of the emerging fracturing and their dependence on the indicators of the strength of the rocks and the depth of occurrence in the massif. The tasks of the study include the installation of fracture indicators, the determination of the parameters of the development of the deformation process around the working, including the effect of longwall mining and taking into account the possibility of reuse of the workings.
 Methodology. To solve the set tasks, the method of field observations was used together with the use of regression dependencies to determine the dependences of the parameters on the influencing factors. In addition, the method of full-scale pull-out tests of anchor support was used, which made it possible to determine the clamping forces of the anchors.
 Originality. In the course of the research, the dependences of stresses and deformation along the K7 coal seam in the conditions of the mine named after Kuzembaev CD JSC "ArcelorMittal Temirtau" for the massif around the mine with fastening. Rational parameters for the use of roof bolting in preparatory mine workings have been established. This type of fastening provides direct contact between rocks and lining. Analysis of the results of calculating the parameters of the roof bolting showed that to maintain the roof in the development workings, it is necessary to take into account the parameters of the roof bolting. The main parameters include the length of the anchors, the total resistance of the roof bolting and the density of the anchors. Anchor support forms laminated rock beams in the roof rocks, which ensure the stability of the workings.
 Conclusions and practical significance. The results of studies devoted to the establishment of the influence of mining-geological and mining-technical factors on the formation of zones of inelastic deformation in the host rocks were considered. Significant dependences of the deformation processes of rocks in the massif around the workings were obtained, and the parabolic zone of destruction of rocks was determined. The practical significance of the research consists in determining the actual indicators of the required bearing capacity of the anchorage at two levels in the conditions of the development of the coal seam k7 of the Kuzembaev mine.