Determining role of heterogeneous microstructure in lowering yield ratio and enhancing impact toughness in high-strength low-alloy steel

Abstract

Here we present a novel approach of intercritical heat treatment for microstructure tailoring, in which intercritical annealing is introduced between conventional quenching and tempering. This induced a heterogeneous microstructure consisting of soft intercritical ferrite and hard tempered martensite, resulting in a low yield ratio (YR) and high impact toughness in a high-strength low-alloy steel. The initial yielding and subsequent work hardening behavior of the steel during tensile deformation were modified by the presence of soft intercritical ferrite after intercritical annealing, in comparison to the steel with full martensitic microstructure. The increase in YR was related to the reduction in hardness difference between the soft and hard phases due to the precipitation of nano-carbides and the recovery of dislocations during tempering. The excellent low-temperature toughness was ascribed not only to the decrease in probability of microcrack initiation for the reduction of hardness difference between two phases, but also to the increase in resistance of microcrack propagation caused by the high density of high angle grain boundaries.