Determination of227Ac in environmental samples by ion-exchange and alpha spectrometry

Abstract

A new method of227Ac determination is based on total sample decomposition, followed by preconcentration as oxalate and hydroxides, and purification from thorium isotopes and rare earths on ion-exchange columns with nitric acid. The actinium is electroplated on stainless-steel discs with near 100% yield from a water/propanol medium and measured by alpha spectrometry.225Ac is used as a yield monitor. An immediate first count gives overall tracer recovery (typically around 80%). A second count two months later gives a sensitive measure of227Ac through its decay products at 5.5–6.1 MeV. Analysis of reference samples gave satisfactory results.