Abstract

A plate of Inconel 600 was interrogated using the resonant ultrasound spectroscopy (RUS) and the reflected leaky Lamb waves (LLW). It was found that the plate used in the present work has anisotropy in its material properties by the RUS. The longitudinal and the transverse wave velocities of the Inconel 600 plate were determined by the RUS, ultrasonic pulse–echo method and cut-off frequencies of the LLWs. The wave velocities in the direction of thickness determined by the RUS under the assumption of the orthotropic symmetry were quite similar to those obtained by other methods, the pulse–echo method and from cut-off frequencies. The reflected LLW from the plate was measured with varying the incident angle. The dispersion curves obtained from the reflected LLWs show good agreement with the theoretical calculation in general. The mismatches may be caused by anisotropy of the plate.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call