Abstract

A rapid and reliable analytical method for the determination of trace elements in human bone by atomic absorption spectrometry is reported. Calcium was determined to estimate the homogeneity of samples. Human bone from the iliac crest was obtained at autopsy of adult subjects. Before analysis samples were decomposed by microwave digestion and acid digestion in a Parr bomb. Zinc, rubidium, strontium, calcium and iron were determined by flame atomic absorption spectrometry (FAAS) and aluminium, copper and lead by electrothermal atomic absorption spectrometry (ETAAS) at optimum measurement conditions. The results for the two digestion procedures agreed for zinc, rubidium and calcium within ±5%, for copper within ±7% and for strontium, iron, aluminium and lead within ±10%. The repeatability of measurement (R.S.D.) for determination of calcium and trace elements after microwave digestion and acid digestion in a Parr bomb was tested in one representative autopsy bone sample by six parallel determinations. It was found to be better than ±5% either for microwave digested samples or samples digested in a Parr bomb, for all elements determined by FAAS and ETAAS techniques. The accuracy of the applied digestion procedures was checked by analysis of trace elements in NIST SRM 1486 Bone Meal reference material. Good agreement of the results with certified values was obtained for both digestion procedures. The microwave procedure developed for digestion of small amounts of sample was applied in trace elements analysis of bone biopsy samples from dialysis patients.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call