Determination of Total Dietary Fiber in Selected Foods Containing Resistant Maltodextrin by Enzymatic-Gravimetric Method and Liquid Chromatography: Collaborative Study

Abstract

A method was developed for determination of total dietary fiber (TDF) in foods containing resistant maltodextrin (RMD) which includes nondigestible carbohydrates that are not fully recovered as dietary fiber by conventional TDF methods such as AOAC 985.29 or 991.43. Because the average molecular weight (MW) of RMD is 2000 daltons, lower MW soluble dietary fiber components do not precipitate in 78% ethanol; therefore, RMD is not completely quantitated as dietary fiber by current AOAC methods. The accuracy and precision of the method was evaluated through an AOAC collaborative study. Ten laboratories participated and assayed 12 test portions (6 blind duplicates) containing RMD. The 6 test pairs ranged from 1.5 to 100% RMD. The method consisted of the following steps: (1) The insoluble dietary fiber (IDF) and high MW soluble dietary fiber (HMWSDF) were determined by AOAC 985.29. (2) Ion exchange resins were used to remove salts and proteins contained in the AOAC 985.29 filtrates (including ethanol and acetone). (3) The amount of low MWRMD (LMWRMD) in the filtrates were determined by liquid chromatography. (4) The TDF was calculated by summation of the IDF, HMWSDF, and LMWRMD fractions having nondigestible carbohydrates with a degree of polymerization of 3 and higher. Repeatability standard deviations (RSDr) were 1.33-7.46%, calculated by including outliers, and 1.33-6.10%, calculated by not including outliers. Reproducibility standard deviations (RSDR) were 2.48-9.39%, calculated by including outliers, and 1.79-9.39%, calculated by not including outliers. This method is recommended for adoption as Official First Action.