Abstract

A method is described in which total soil boron (B) was determined by inductively coupled plasma atomic emission spectrometry (ICP‐AES). The method is based on microwave‐assisted digestion of soil samples with nitric acid (HNO3), hydrofluoric acid (HF) and hydrogen peroxide (H2O2). Excess HF was eliminated by adding silicon (IV) oxide (SiO2). The B 208.959 nm line was chosen as the analytical line to avoid the spectral interferences of iron (Fe). A detection limit of 0.0045 mg L‐1 was obtained with the selected analytical line under the optimized operating conditions. Four National Institute of Standards and Technology (NIST) standard reference materials (three soils and one river sediment) and four different type of practical soils were analyzed to test the reliability of the method. The total B concentration in selected samples ranged from 19 to 76 mg kg‐1. The excellent recoveries of the spike (98.5–101%) indicate that the proposed procedure is effective and feasible for the determination of total B in soils.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.