Abstract
Abstract The atomic absorption spectrophotometric determination of titanium was subject to interference by other elements in a nitrous oxide-acetylene flame with a Perkin-Elmer Model 303 atomic absorption spectrophotometer, fitted with a 5-cm long-path slot burner. The effects of various other elements, acids, and water-miscible organic solvents on the titanium atomic absorption were examined. Aluminum produced the greatest enhancement of the titanium absorption of all the elements examined. Both butyric acid (2.0 M) and diethylene glycol mono-butyl ether (20%) enhanced the titanium absorption by about 100% in aqueous solutions. In the presence of 5000 ppm aluminum or 20% diethylene glycol monobutyl ether, the interferences from other elements appeared to be completely removed. Furthermore, the extraction of titanium with cupferron into methyl isobutyl ketone was successful in effecting an increase in the sensitivity of titanium and in eliminating, or at least diminishing the interferences from other elements. The atomic absorption method was then applied to the determination of titanium in ferric oxides, nickel-chromium steel, nickel alloy, and steels with satisfactory results.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.