Determination of Three Phthalate Esters in Environmental Samples by Coal Cinder Extraction and Cyclodextrin Modified Micellar Electrokinetic Chromatography

Abstract

A new micellar electrokinetic chromatography (MEKC) method using beta-cyclodextrin (ß-CD) as the electrophoresis additive has been developed for the simultaneous determination of dimethyl phthalate (DMP), diethyl phthalate (DEP) and di(2-ethylhexyl) phthalate (DEHP) in environmental samples. To improve the sensitivity of cyclodextrin-modified MEKC (CD-MEKC), a flow injection procedure using a microcolumn packed with coal cinder as the solid-phase extractant was also investigated for the preconcentration and separation of DMP, DEP and DEHP in environmental samples. Parameters affecting CD-MEKC separation and coal cinder flow injection solid-phase extraction were systematically researched. In the presence of the running buffer [5 mmol/L of borax, 5% (v/v) methanol and 25 mmol/L of sodium dodecyl sulfate at pH 9.5], the addition of 14 mmol/L ß-CD greatly improved the separation efficiency. The analytes were quantitatively adsorbed by coal cinders and readily desorbed quantitatively with 0.2 mL of 10% (v/v) methanol-10 mmol/L disodium hydrogen phosphate. Under the optimum conditions, the enrichment factor of coal cinder was 60, and the determination limits of DMP, DEP and DEHP were 3.07, 2.07 and 4.06 ng/mL, respectively. The presented procedure was successfully applied to determine DMP, DEP and DEHP in landfill leachate and water samples with satisfactory results.