Abstract
The size and shape of silver and indium nanoparticles embedded in a plasma polymer matrix formed from benzene or styrene monomer were determined by transmission electron microscopy (TEM) in lateral direction and by cross-sectional transmission electron microscopy (XTEM) in vertical direction. In multilayer assemblies consisting of plasma polymer/plasma polymer metal composite/plasma polymer [ABA], silver as well as indium nanoparticles were embedded only in one plane. XTEM micrographs on samples before and after appropriate thermal annealing (450 K) showed, that the multilayer [ABA] structure was not destroyed. At a higher annealing temperature and time (570 K, 3 h) only parts of the plasma polymer matrix were left. With all thermal annealed samples, reshapening and coalescence of the embedded silver particles was found. For multilayers with embedded indium particles, the second plasma polymer layer was formed mainly as a shell around the large particles. During thermal annealing in the electron microscope, the formation of indium oxide particles inside these shells was observed.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
