Determination of the True Intraocular Pressure and Modulus of Elasticity of the Human Cornea in vivo

Abstract

The purpose of this study was to determine the true intraocular pressure and modulus of elasticity of the human cornea in vivo . The cornea was modeled as a shell, and the equations for the deformations of a shell due to applanating and intraocular pressures were combined to model the behavior of the cornea during applanation tonometry. At certain corneal dimensions called the calibration dimensions, the applanating and intraocular pressures are considered to be equal. This relationship was used to determine the modulus of elasticity of the cornea and the relationship between the applanating and intraocular pressures. The true intraocular pressure (IOPT) was found to be related to Goldmann's applanating pressure (IOPG) as IOPT=IOPG/K , where K is a correction factor. For the calibration corneal thickness of 0.52 mm, the modulus of elasticity E in MPa of the human cornea was found to be related to the true intraocular pressure IOPT in mmHg as E=0.0229 IOPT. The generalization of the Imbert–Fick law that takes into account the effect of corneal dimensions and stiffness was found to be given by IOPT=73.5 W /(K A), where W is the applanating weight in gf (gram force) and A is the applanated area in mm2. The calculated true intraocular pressure and modulus of elasticity were found to agree with published experimental results. The mathematical model developed may therefore be used to improve results from applanation tonometry and to estimate the mechanical property of the cornea in vivo .