Abstract
ABSTRACTRadiocarbon (14C) is the one of the most important radionuclides released from the nuclear facilities to the environment. Currently, inorganic 14C is checked during regular environmental monitoring as part of the groundwater monitoring program of the Paks Nuclear Power Plant. Several studies have shown that organic 14C can be also an important and sensitive tool for detection of possible leakage of nuclear technological systems. For this reason, a wet oxidation method was developed for the accelerator mass spectrometry (AMS) 14C measurement technique to determine the 14C activity concentration of the total dissolved carbon content of water samples, coming from environmental monitoring wells. The overall efficiency of the oxidation was around 94 ± 5% for different types of tested organic compounds. The typical 14C background (1–2 pMC) is obtained by preparation of blank samples, which allows a detection level of around 5·10–5 Bq L–1. The activity of the organic fraction can be calculated using the formula presented in the study. The method was applied for water samples deriving from environmental monitoring wells of a pressurized-water reactor (PWR) type of NPP. The results of our investigations over the 14 different water samples around the Paks NPP show that DO14C contribution to the total 14C activity concentration was between 5–25%.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
