Abstract
The scan-plane fields in the focal region of a beam-scanning paraboloid are determined from physical optics. Amplitude and phase contours are presented, and comparisons are made with the geometrical-optics results. Contours for maximum scan-gain are determined as a function of F/D and illumination taper and compared with the Petzval surface. Unless the F/D is very large or spillover is excessive, a higher scan gain is achieved when the axis of a directional feed is parallel to the axis of the reflector than when the feed is directed toward the vertex. The contour of maximum scan-gain is a function of both illumination taper and F/D . In general, larger F/D values tend to have a maximum-gain contour close to the focal plane, while the smaller F/D values tend to have a maximum-gain contour closer to the Petzval surface. Increasing the illumination taper moves the maximum-gain contour closer to the Petzval surface. Normalized maximum-gain contours are presented as a function of beamwidths of scan. The frequency dependence of these results is discussed.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.