Abstract
We report on thermal conductivity measurements performed on glass spheres of different grain sizes under varying pressure conditions ranging from 10−5 up to 1000 hPa. Glass spheres of 0.1 up to 4.3 mm were used as an analogue for the coarse‐grained fractions of planetary regolith. From the obtained conductivity versus pressure data, sample pore sizes were derived and compared to estimated pore sizes. An increasing difference between derived and estimated pore size with increasing grain size was found. The behavior of the granular matter with decreasing pressure was analyzed by estimating the Knudsen number for the given system. The results indicate a high variability of the effective thermal conductivity for Martian conditions. Furthermore, the results imply that the thermal conductivity reaches a grain size‐dependent, but pressure‐independent, value for pressures below 0.01 hPa. For vacuum conditions a linear relation between grain size and effective thermal conductivity was found. Additionally, a mixture was analyzed, which showed a stronger decrease with gas pressure compared to the single‐sized samples. From the pore size derived for the mixture an “effective” grain size composed of weighted mean of the mixture components was determined.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.