Abstract
Using continuous-flow luminal microperfusion techniques, the influence of the intraluminal urate concentration on urate absorption was determined in the rat proximal tubule. When the estimated contribution of passive permeation was accounted for, the "active" component of urate absorption demonstrated saturation kinetics. The apparent Km was 0.17 mM and the Vmax 0.31 pmol.min-1.mm-1. These transport constants were similar when derived from either a water-absorbing or steady-state equilibrium perfusion solution. The reflection coefficient was determined in studies employing the techniques of simultaneous capillary and luminal microperfusion. Both perfusion solutions contained p-chloromercuribenzoate to inhibit active urate transport. In the presence or absence of an osmole gradient imposed across the tubule, the reflection coefficient for urate averaged 0.94. These studies provide evidence that urate absorption in the rat proximal tubule is a carrier-mediated process. They also provide independent confirmation of the passive flux coefficient derived in prior studies. Finally, the results suggest that solvent drag would have little effect on urate absorption.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.