Abstract

The penetration of sulfate ions into the concrete often causes durability problems such as spalling, cracking, and strength loss. Traditional methods for sulfates content test in cement-based materials, a large number of toxic and high-risk chemical reagents such as hydrochloric acid, barium chloride, barium chromate are used. In this research, the sodium carbonate extraction (SCE) method was used to determine the sulfates content in Ordinary Portland cement (OPC) and Calcium sulphoaluminate (CSA) cement while the gravimetric method was used as standard method to evaluate the accuracy of SCE method. The optimum SCE method operation conditions were determined as 0.30 mol/L sodium carbonate solution, liquid–solid ratio at 100:1 and particle size smaller than 500 μm. The results indicated that the replacement of gravimetric method with SCE method for sulfates content test is acceptable in CSA cement but improper for Portland cement system. Through the FTIR, XRD, and TG-DSC analysis, it was found that the absorption of sulfate ions by C-S-H gels was responsible for the failure of SCE method in Portland cement system.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call